About us About us
Join Our Newsletter
If you decide not to take a faucet, you will be refunded $245.00 after ordering.
Center Drain
No Remote Parts - All Built-in
Reinforced Acrylic Construction
Experience the perfect blend of vintage elegance and modern luxury with this beautifully crafted double ended clawfoot bathtub. While embracing a classic design, it features cutting-edge technology for an indulgent bathing experience.
Key Features:
Water Jetting: Enjoy customizable comfort with direction and speed adjustable side jets, along with direction controls for four back jets, allowing you to tailor your massage experience.
Water Speed & Pressure Control: Fine-tune your relaxation by adjusting water pressure. Higher pressure for the back jets can be achieved by turning the flange on the variable-speed jets, while you can easily reduce output as desired.
Discreet Fittings Position: Maintain the classic look of your bathtub with a double-shell design that hides all fittings and jetting components between the inner and outer shells, preserving its timeless aesthetic.
Bath Salts & Bubble Bath Friendly: Feel free to enhance your soak with bath salts or bubble bath. Just ensure salts are fully dissolved before use to prevent any damage to the tub surface.
Easy Care & Maintenance:
The high-gloss acrylic finish is simple to maintain—just wipe it down with a soft cloth and mild liquid soap for a lasting shine.
To complete this luxurious package, we include a premium British Telephone-style bathtub faucet, available in your choice of finish. If you prefer not to use the deck-mounted faucet, simply select the option to exclude it from your order in the customization table.
SanSiro Jetted Tubs - Electrical Cord Position on Tub
All of the jetted tubs in the SanSiro range use a 3' long cable 110v – 15-amp standard 3 pin plug. You have choices as to where you would like the plug on the jetting system to connect to the GFCI outlet in your home.
1 - Leave the connection under the tub. In this case, you would need to have your GFCI at the control board and not on the plug under the tub.
2.- Connect to a wall socket GFCI. You can drill holes in the outside of the tub and run the electrical cable to a wall mounted GFCI near the tub.
3 - To drill the holes, we recommend first drilling the 1/8” (bit supplied) pilot hole and then the hole saw supplied. If you have two plugs, drill two holes.
4 - You can then feed the cord through the hole(s) and attach the rubber grommet. This grommet fits around the inside of the hole to prevent a rough tub edge rubbing on the electrical cord.
Just in case you need it, we include an additional 3’ long extension cord for each plug on the tub.
Lead Time:
Base Price:
Subtotal (with current options):
Free Curbside Delivery in the Lower 48