No Remote Parts - All Built-in
Center Drain
Adjustable Speed Jet Control
For scale - the mannequin inside the tub in the photo is 5'8" tall
Construction - Reinforced Acrylic

• Water Jetting
  Direction control on four back and two foot water jets. There are four direction with speed control side jets, when turned to low, this offers a more robust massage action to the feet and back.
• Fittings Position
• The double shell tub design makes it possible to maintain the original bathtub appearance with no visible or remote jetting parts. All of the fittings are contained within the cavity in between the shells.
• Bath Salts and Bubble Bath
  It is safe to use bath salts and bubble bath. However, make sure the salts are dissolved before entering the bath or they can scratch the tub surface.
• Care and Maintenance
  Cleaning the high gloss acrylic finish requires a wipe down with a soft cloth and some very gentle liquid soap without abrasives.
• Recommended Regular Maintenance
  

  To maintain excellent hygiene, we strongly recommend the following preventative maintenance be carried out each 1-2 months.

  • Fill you tub with warm water to 2" above the top jet.
  • Add two cups of household bleach.
  • Activate all the jets on in the fully open position.
  • Allow the jets to run for 15 minutes.
  • Switch the jets off and allow the water to sit for 15 minutes.
  • Empty the tub.
  • Re-fill with fresh water, again 2" above the top jet.
  • Run the jets for 15 minutes.
  • Empty the tub and the job is finished.
  • If the tub is not in constant use, it is still very important to continue the maintenance as described herein.