About us About us
Join Our Newsletter
Skip to product information
Two tub shells. The outer shell is new 99.6% pure 1.6mm thick copper from the mill. We do not use re-cycled copper. The inner shell is 3/4" thick, heavy duty, CoreAcryl double skin, easy clean acrylic.
The outer shell fits snugly into the groove under the roll top on the CoreAcryl interior tub. The CoreAcryl tub shell is supported on a steel frame that has four height adjustable foot supports. These foot supports are used to adjust height on uneven floors as well as to attach the tub to the floor. The support for the inner shell is also attached to the outer copper shell creating a single unit, not two separate parts. The shells can be easily separated and re-connected if required for access purposes.
The overall feel is that of a very substantially built single bathtub.
This tub is very simple to install. The 1.5" tub drain can be attached to either a PVC hub fitting or an Island floor drain with tailpiece. There is no requirement for any exterior piping or tubing and the tub can sit anywhere in the room with nothing except the beautiful shell showing.
The tub has an elegantly stylish slotted overflow that is integrated into the factory supplied floor drain and does not require any additional pipework. The 'Firm Touch Drain Stopper' in high gloss bright white, compliments the finish of the tub.
To guarantee no leaks on the overflow, every single tub we supply is fully leak tested and approved before shipping.
The inner shell has an easy clean, high gloss slip resistant bathing well floor. A soft cloth with some liquid soap will remove any marks.
Tub exterior finish. The exterior shell has an aged verdigris finish. Some copper will show through, the amount depends on how the aging agent works with the copper on the days it is applied, no two tubs will be the same. On completion of the aging, we apply three coats of matte clear lacquer. This protects the surface and prevents any of the verdigris rubbing off on clothing, towels etc.
Air Jetting. The 'Ultra Quiet' air blower and air tubing etc. are housed inside the cavity between the inner and outer shells. The blower will heat the air to the 12 air jets positioned on the tub floor. Even though the air will in fact be warmer than the water in your tub, it will still feel a little cool when it initially touches your skin. The jets are activated using a wireless handheld remote control that also controls the air speed. Non-return valves are used to prevent water running into the airlines or from reaching the blower. However, we recommend after each use to activate the blower for 10 seconds to dry out any residual moisture that may have become trapped in the lines.
The electrical plug can be placed either under the tub or on the wall behind the tub. The electrical requirement is 110v-15amp and should always be protected by an easily accessible GFCI.
The bathtub is ICC-ES tested and UL listed and approved.
Key Features
- Ready to plug into a standard 110v-15amp GFCI
- No external parts
- Mannequin inside tub in photo represents a 5'8" tall person
- A beautiful French Bateau style air jetted, skirted bathtub using the highest quality 99.6% pure copper for the exterior shell and very low maintenance, 3/4" thick heavy duty CoreAcryl acrylic shell on the interior.
- The exterior verdigris surface of the tub is clear matte lacquered and will not patina further.
- We use non-recycled 1.6mm thick, mill certified 99.6% pure copper sheet.
- Includes a high gloss bright white 'Firm Touch Drain Stopper' with stylish, slotted overflow
- 'Ultra Quiet' air blower will also heat the air
- 12 variable speed air jets in the tub floor
- Waterproof wireless remote control operation
- Requires 110v-15amp GFCI electrical connection
- Faucet is not included.
- Requires either a wall mount or freestanding faucet
- Four adjustable height foot pads for non-level floors
- Tub is solidly connected to the floor using the adjustable height foot pads with industrial Velcro supplied
- Tub shell made in Europe, finished in the USA
- MA Code accepted
Download
SanSiro Toulon59VGAir 59 x 31.5 Warmed Air Jetted French Bateau Tub with Verdi Gris Aged Solid Copper Exterior – Air Jetted Copper Bathtub
Experience the SanSiro Toulon59VG Air Jetted 59 x 31.5 Verdigris Aged Solid Copper Exterior French Bateau Freestanding Tub with Thick CoreAcryl Acrylic Interior, a beautifully crafted bathtub built with premium materials and finishes. Designed for a soothing air jet massage system, its striking design and quality craftsmanship make it a perfect centerpiece for any bathroom.
A Stunning French Bateau Air Jetted Skirted Bathtub with No Remote PartsTwo tub shells. The outer shell is new 99.6% pure 1.6mm thick copper from the mill. We do not use re-cycled copper. The inner shell is 3/4" thick, heavy duty, CoreAcryl double skin, easy clean acrylic.
The outer shell fits snugly into the groove under the roll top on the CoreAcryl interior tub. The CoreAcryl tub shell is supported on a steel frame that has four height adjustable foot supports. These foot supports are used to adjust height on uneven floors as well as to attach the tub to the floor. The support for the inner shell is also attached to the outer copper shell creating a single unit, not two separate parts. The shells can be easily separated and re-connected if required for access purposes.
The overall feel is that of a very substantially built single bathtub.
This tub is very simple to install. The 1.5" tub drain can be attached to either a PVC hub fitting or an Island floor drain with tailpiece. There is no requirement for any exterior piping or tubing and the tub can sit anywhere in the room with nothing except the beautiful shell showing.
The tub has an elegantly stylish slotted overflow that is integrated into the factory supplied floor drain and does not require any additional pipework. The 'Firm Touch Drain Stopper' in high gloss bright white, compliments the finish of the tub.
To guarantee no leaks on the overflow, every single tub we supply is fully leak tested and approved before shipping.
The inner shell has an easy clean, high gloss slip resistant bathing well floor. A soft cloth with some liquid soap will remove any marks.
Tub exterior finish. The exterior shell has an aged verdigris finish. Some copper will show through, the amount depends on how the aging agent works with the copper on the days it is applied, no two tubs will be the same. On completion of the aging, we apply three coats of matte clear lacquer. This protects the surface and prevents any of the verdigris rubbing off on clothing, towels etc.
Air Jetting. The 'Ultra Quiet' air blower and air tubing etc. are housed inside the cavity between the inner and outer shells. The blower will heat the air to the 12 air jets positioned on the tub floor. Even though the air will in fact be warmer than the water in your tub, it will still feel a little cool when it initially touches your skin. The jets are activated using a wireless handheld remote control that also controls the air speed. Non-return valves are used to prevent water running into the airlines or from reaching the blower. However, we recommend after each use to activate the blower for 10 seconds to dry out any residual moisture that may have become trapped in the lines.
The electrical plug can be placed either under the tub or on the wall behind the tub. The electrical requirement is 110v-15amp and should always be protected by an easily accessible GFCI.
The bathtub is ICC-ES tested and UL listed and approved.
Availability: Ships in 2 to 3 Weeks
Base Price:
$5,150.00
Subtotal (with current options):
Free Curbside Delivery in the Lower 48